• Nebyly nalezeny žádné výsledky

Reviewer’s form for thesis evaluation

N/A
N/A
Protected

Academic year: 2022

Podíl "Reviewer’s form for thesis evaluation"

Copied!
2
0
0

Načítání.... (zobrazit plný text nyní)

Fulltext

(1)

European Erasmus Mundus Master

Sustainable Constructions under natural hazards and catastrophic events 520121-1-2011-1-CZ-ERA MUNDUS-EMMC

1

Reviewer’s form for thesis evaluation

1. Identification of the student

Student: Montenegro Eduarte Juan Sebastian

Thesis: Design of prequalified European beam-to-column connections for moment resistant frames with component based finite element method

Institution: ČVUT v Praze Academic

year:

2016/2018

2. Identification of the reviewer

Name: František Wald

Institution: ČVUT v Praze Position: Prof.

3. Fulfilment of thesis goals

excellent  above aver. X average  below aver.  weak  Comments:

The work fulfil all the objectives.

4. Academic/scientific/technical quality

excellent  above aver.  average X below aver.  weak  Comments:

The results are valuable. The final sensitivity study should be longer.

5. Formal arrangement of the thesis and level of language

excellent x above aver.  average X below aver.  weak 

(2)

European Erasmus Mundus Master

Sustainable Constructions under natural hazards and catastrophic events 520121-1-2011-1-CZ-ERA MUNDUS-EMMC

2

Comments:

The theses are written well.

6. Further comments

The colleague worked very independently on rather difficult task.

7. Grade: C

Use the following scale

A (excellent) B (very good) C (good) D (satisfactory) E (sufficient) F (fail)

In Prague 8 Jan 2018

The Reviewer

________________________

Signature

Odkazy

Související dokumenty

In this phase the general method of calculating the critical load for a beam-column hinged at the ends is illustrated; then the case of a beam-column composed of no-tension and

Thesis title: Design methods of flat slabs for punching – European and North American practices.. Author’s name: Yerlan Koshekbayev Type of thesis :

In the light of these considerations, “Equaljoints” project was aimed at providing European qualification of beam-to-column joints for seismic application, focusing on

The rest of the thesis describes the theoretical background of the proposed measurement method, proposes the method for data fusion and presents an experimental evaluation of

The goal of this thesis was to design a method for localization of sources of RF transmission using a formation of relatively localized MAVs equipped with a rotating

In this thesis we use the tools provided by shape calculus to solve free boundary problems of the Bernoulli type in combination with the boundary element method (BEM) for the

The paper focuses on the method which combines accelerated two-grid discretiza- tion scheme with a stabilized finite element method based on the pressure projection for the

The finite element method equipped with stabilization has proven to be a powerful tool for solving flows of incompressible fluids with high Reynolds numbers.. But applying