• Nebyly nalezeny žádné výsledky

CZECH TECHNICAL UNIVERSITY IN PRAGUE Faculty of Mechanical Engineering, Department of Process Engineering

N/A
N/A
Info
Stáhnout
Protected

Academic year: 2022

Podíl "CZECH TECHNICAL UNIVERSITY IN PRAGUE Faculty of Mechanical Engineering, Department of Process Engineering"

Copied!
1
0
0

Načítání.... (zobrazit plný text nyní)

Stáhnout nyní ( 1 Stránka )

Fulltext

(1)

CZECH TECHNICAL UNIVERSITY IN PRAGUE

Faculty of Mechanical Engineering, Department of Process Engineering

Evaluation of Diploma Thesis

Study program: Mechanical Engineering Study field: Process Engineering

Author:Arunanshu Chakravarty

Title:CFD simulation of heat transfer in an agitated vessel

Author accomplished the given tasks very well. He performed numerical simulations in ANSYS Fluent of fluid flow and heat transfer in an agitated vessel on a quite good level. I appreciate the evaluation of the transient simulations using MATLAB software, including the regression analysis of the heat transfer results and power characteristics of the impeller. The author showed very good abilities of individual work. I would expect a little better skills in graphical postpro- cessing of the results, but it is just a minor imperfection of the work which is written clearly, using very good English language.

Evaluation: excellent (A)

22. 8. 2017

Ing. Karel PETERA, Ph.D.

Odkazy

Stáhnout nyní ( PDF - 1 Stránka - 31.23 KB )

Související dokumenty

Hlavní práce68045_chyy00.pdf, 1.7 MB Stáhnout

This Master thesis is focused on improving the development process life cycle, project management and testing activities in software company by using TMMi approach, Agile

Oponentura62079_oskv01.pdf, 55 kB Stáhnout

V teoretické části autor představuje postupně SDLC, vodopádový a agilní přístup k vývoji, projektový management, testování SW, cloudové technologie, framework TMMi i

Hodnocení vedoucího68045_doucek.pdf, 56.2 kB Stáhnout

Kromě toho uvádí autor v této části i SWOT analýzu, která měla být až v části výsledky.. V části praktické jsou pak uvedeny části, které se věnují vymezení

VÝROČÍ ANNIVERSARIES

He was, among others, Vice- Chairman of the Prague Chamber of Commerce, a member of the Scientifi c Board of the Faculty of Civil Engineering of the Czech Technical University

ŽIVOTNÍ JUBILEUM ING. JIŘÍHO POKORNÉHOANNIVERSARY OF ING. JIŘÍ POKORNÝ LIFE

He was, among others, Vice- Chairman of the Prague Chamber of Commerce, a member of the Scientifi c Board of the Faculty of Civil Engineering of the Czech Technical University

80 LET ING. JIŘÍHO PAVLÍKA, CSC.ING. JIŘÍ PAVLÍK, CSC., OCTOGONARIAN

After graduating from the Faculty of Civil Engineering of the Technical University in Brno with a degree from the Department of Civil Engineering and Traffi c Structures in 1963,

VÝROČÍ ANNIVERSARIESDOC. ING. RICHARD ŠŇUPÁREK, CSC., OSMDESÁTILETÝDOC. ING. RICHARD ŠŇUPÁREK, CSC., OCTOGENARIAN

After graduating from the Faculty of Civil Engineering of the Technical University in Brno with a degree from the Department of Civil Engineering and Traffi c Structures in 1963,

STAVEBNÍ VŠB –TECHNICKÉ UNIVERZITY V OSTRAVĚGEOTECHNICS AND UNDERGROUND STRUCTURES AT THE TWENTY YEARS OLD FACULTY OF CIVIL ENGINEERING OF THE VŠB – TECHNICAL UNIVERSITY OF OSTRAVA

This year, the Faculty of Civil Engineering of the VŠB – Technical University of Ostrava celebrates 20 years of its existence, but the Department of Geotechnics , which is one of