Instruction for connected PC to projector
over Wifi or LAN
First starting the projector
1) start the projector on the driver
2) Start -> All programs -> Epson projector -> EasyMP Network Projection ->
->EasyMP Network Projection Ver.2.76
3) a Select Connection Mode sign Advanced Connection Mode and click „OK“
4) sign Create an exception for the program in Windows Firewall and click „Yes“
5) No projector was found click „OK“
6) click „Manual search“
7) write IP projector: 10.249.17.17 and click „OK“
8) must not be sign Disable interrupt connection and Use multi-display and click „Save in the profile“
9) profile name: M8UCEBNA1 and click „Add“
10) must be check in table with projector, if not check, click on the Standby in the table (do check) and right down click“Connect“
11) on the driver projector click LAN and picture show on the white wall
12) on the PC show in right down strip, for disconnect of projector press „Disconnect“
Next starting the projection:
1) start the projector on the driver
2) Start -> All programs -> Epson projector -> EasyMP Network Projection ->
->EasyMP Network Projection Ver.2.76
3) a Select Connection Mode sign Advanced Connection Mode and click „OK“
4) No projector was found click „OK“
5) Click „Profile“ and click „M8UCEBNA1“
6) must be check in table with projector, if not check, click on the Standby in the table (do check) and right down click“Connect“
7) on the driver projector click LAN and picture show on the white wall
8) on the PC show in right down strip, for disconnect of projector press „Disconnect“
