• Nebyly nalezeny žádné výsledky

Classification of Diploma Thesis – opponent

N/A
N/A
Protected

Academic year: 2022

Podíl "Classification of Diploma Thesis – opponent"

Copied!
1
0
0

Načítání.... (zobrazit plný text nyní)

Fulltext

(1)

Classification of Diploma Thesis – opponent

Author of classification: Ing. Michal Weisz, Ph.D.

Supervisor: Ing. Pavel Šuránek, Ph.D.

Opponents: Ing. Michal Weisz, Ph.D.

Title: Active Controlled Structure

Thesis version: 1

Student: Srikanth Sreethar

1. Problematics of thesis

The aim of this thesis is to design and verify procedure of active vibration control of the structure.

The work was demanding both professionally and temporarily, especially with regard to the wide range of knowledges. The work is directly linked to actual problem The active vibration of the structure.

2. Achieved results

The results of the thesis can be considered a prepared mechanical model, equipped with an actuator for active vibration damping, an algorithm developed for vibration control on the model and last but not least numerous simulations performed on a mathematical model of the control system, which are subsequently supported by conclusions.

3. Originality of thesis

The work is logically divided into several parts. The introductory theoretical part is based on the current state of knowledge and especially on the available technical standardization. Processing is original and due to the nature of the assignment is undoubtedly the work of the student.

4. Formal essentials of thesis

The formal side of work is good. Uniform numeric format is used in graphs and tables. The adjustment is uniform, the work is consistent.

5. Questions to student

1, Could you specify what the frequency limits are with respect to the vibration minimization device used? At what frequency is the prepared system really usable?

2, For what loads can similar types of actuators be used, energy systems, heavy steel structures, civil engineering?

6. General revaluation of thesis

The student showed a very good degree of engineering skills at work. The goals of the work were fulfilled and the work is undoubtedly original. I recommend work for defense.

excellent Overall classification:

Ostrava, 04.06.2021 Ing. Michal Weisz, Ph.D.

Odkazy

Související dokumenty

In the paper, we propose distributed feedback control laws for active damping of one-dimensional mechanical structures equipped with dense arrays of force actuators and position

Model predictive vibration control: Efficient constrained MPC vibration control for lightly damped mechanical structures... Extent and terms of a thesis are specified in directions

Student created the system for suppression of three selected modes of vibration and successfully validated the idea for implementing piezoelectric actuator in the construction of

This thesis goes through that process by describing creation of a FEM model, vibration testing of a physical design model, correlation of the FEM model,

The developed algorithm was subdivided into the following subitems: denoising of US images with the use of discrete wavelet transform (DWT), create an algorithm for the

The first task of the thesis is to design an easy to apply algorithm for model parameter identification, which is then used in the applied internal model control scheme.. The

As a supervisor, I went to the diploma thesis with the proviso that a proposal for the implementation of the integration of IO-Link OPC UA into the Siemens system will be developed

As a supervisor, I went to the diploma thesis with the proviso that a proposal for the implementation of the integration of IO-Link OPC UA into the Siemens system will be developed