Vavrečkova 275 762 72 Zlín
Posudek vedoucího diplomové práce
Příjmení a jméno studenta: Bc. Michal Drobilík
Studijní program: CHTM
Studijní obor: Inženýrství polymerů Zaměření
(pokud se obor dále dělí):
Ústav: inženýrství polymerů
Vedoucí diplomové práce: Dr.-Ing. Radek Stoček
Akademický rok: 2016/2017
Název diplomové práce:
Kinetic of Curing at the Interface Rubber-Rubber
Hodnocení diplomové práce s využitím klasifikační stupnice ECTS:
Kritérium hodnocení Hodnocení dle ECTS
1. Aktuálnost použité literatury
A - výborně2. Využití poznatků z literatury
B - velmi dobře3. Zpracování teoretické části
B - velmi dobře4. Popis experimentů a metod řešení
A - výborně5. Kvalita zpracování výsledků
B - velmi dobře6. Interpretace získaných výsledků a jejich diskuze
B - velmi dobře7. Formulace závěrů práce
B - velmi dobře8. Přístup studenta k diplomové práci
A - výborněPředloženou práci doporučuji k obhajobě a navrhuji hodnocení
B - velmi dobře
Posudek vedoucího diplomové práce Strana 1/2
Verze 2015/05
Vavrečkova 275 762 72 Zlín
Komentáře k diplomové práci:
The diploma thesis is focussed on the kinetic of curing process at the interface between two rubber sheets. In the rubber industry the common trend in rubbe production is to compose the rubber from sheet layers to enhance the mechanical behaviour and stability of the product. The tipical example is tire with the multilayer tread as well as side wall. However the multilayer rubber product are well known, the methodology describing the kinetic of the curing process between this laeyer has still not benn etsbalished. Thus within the framework diploma thesis the student sumarizes the curend state of the art and proposes a methodology leading to discribing of this phenomena, which he finally evaluated by using of a common testing equipment - DMA. However the scientific topic was very new for the student and he has to learn new knowledges as well as tolls like CAD designing he came over very well and with high interest worked on the theoretical as well as experimental part.
Finally the student evaluated the functionality of the proposed testing methodology on varied rubber types and corelated the results with the common curing measurement. Student works intensively as well very independently fullfiled all requirements on the tasks and scientific work I recommend the submitted thesis for the defense.
Předloženou diplomovou práci doporučuji k obhajobě.
Otázky vedoucího diplomové práce:
V
Zlínědne 31.5.2017Podpis vedoucího diplomové práce
Posudek vedoucího diplomové práce Strana 2/2
Verze 2015/05